Mould Removal & Prevention Service

Johnson Group air conditioner cleaning and sanitizing

Benefits of Using Our Service

  • SmellGREEN® Natural Fragrance Gel, 100% Natural, Non-Toxic, Converts Odour Molecules (Formaldehyde) into Non Volatile Compounds. A Real Decomposition And is Efficient in Purifying Air
  • SmellGREEN® Natural Disinfectant Spray (U.S. EPA Reg. 87742-1 & Health Canada DIN 02390035) Kills Bacteria, Viruses & Fungi, Decomposes Odours & Mould (Musty) Smell
  • AerisGuard™ Anti-mould Coating Inhibits the Growth of Moulds and Bacteria Walls and Ceilings, US EPA Approved Coating Provides Up to 12 Months Protection
  • AURO Anti-mould Paint™ Inhibits the Growth of Bacteria & Moulds on Walls and Ceilings. Protection up to 12 months
  • Hygiena ATP (Adenosine Triphosphate) Meter to Calculate the Bacterial Level on the Walls
  • This service is environmental-friendly, baby-friendly and allergy-friendly

Why do we need to remove moulds?

We rarely deep clean in all areas of the home on regular basis, this leaves various forms of moulds and fungi free to sprout and thrive in the untreated conditions. Moulds can cause many diseases to humans, allergic sensitivity to mould spores, from the growth of pathogenic moulds within the body, or from the effects of ingested or inhaled toxic compounds (mycotoxins) produced by moulds.

These micro-organisms can have damaging effects on the health, causing allergy like nasal, headaches, nausea, skin irritation, asthma or more serious respiratory and lung difficulties in the long term. Therefore, preventing moulds (mildew) and fungi in the home is become extremely important, especially, if your home is at a high humidity level.

Ask for help from our Home Sanitizing Professionals

In keeping our words “Reducing any unnecessary use of toxic chemical to further reduce the impact to the rest of environment”. This service not only can minimize your family from exposing to toxic chemicals and unnecessary contamination but also reduce the growth of moulds and bacteria effectively.

Ask for help from our Home Sanitizing Professionals

Mould Removal & Prevention Service

Option 1 – Clean Mould (Mildew) off Painted Walls

  • Spray SmellGREEN® Natural Disinfectant on walls and ceilings with fogging machine and wait 3 minutes for mould spores and other viruses to be killed
  • SmellGREEN® Natural Disinfectant Spray to disinfect and clean mould (mildew) off the walls and ceilings
  • Spray again SmellGREEN® Natural Disinfectant on walls and ceilings with fogging machine and allow to air dry
  • AerisGuard™ Anti-mould Coat (EPA Approved) to the walls and ceilings to inhibit the growth of bacteria & moulds
  • Calculate the bacterial level on the walls with ATP Meter
  • SmellGREEN® Natural Fragrance Gel decomposes mould odour

Option 2 – Wall Painting Service for Moldy Walls (For Heavy Mould)

  • SmellGREEN® Natural Disinfectant Spray to disinfect and clean mildew off the walls and ceilings
  • AURO Anti-mould Paint™ to paint the walls or ceilings to inhibit the growth of bacteria & moulds
  • Calculate the bacterial level on the walls with ATP Meter Calculate the bacterial level on the walls with ATP Meter
  • SmellGREEN® Natural Fragrance Gel ecomposes mould odour

Remarks

The actual cleaning or anti-mould performances may vary over time.

Hygiena ATP Meter & ATP Test

ATP (Adenosine Triphosphate) is a nucleoside triphosphate used in cells as a coenzyme, often called the “molecular unit of currency” of intracellular energy transfer. By collecting samples from the environments, and measure the ATP level, it gives a direct measure of biological concentration in the environments.

For those sensitive areas like homes, schools, nurseries and, health institutions (i.e. clinics), ATP Test provides a quick way to detect microorganisms. This is how Hygiena ATP Meter works quickly (a few minutes) to verify if surfaces have been cleaned thoroughly and free from living organisms like bacteria or moulds.In the other hand, conventional Incubation technique for bacterial growth may take a few days to complete.

Testing Method

Press the swab, holding only the stem of the swab, firmly against the test area and rub vigorously, rotating the swab while covering the whole area. Put the casing in the ATP Luminometer and wait for 15 seconds to calculate the bacterial level (0 – 9999).

ATP Levels Indications

  • Very clean (e.g. hospitals) <15
  • Clean (e.g bakeries, restaurant kitchen) <50
  • Acceptable (e.g schools, public places, hotels) <100
  • Unsatisfied 100-500
  • Warning >500

AerisGuard™ Surface Treatment (Anti-mould Coat)

In a humid environment, the ceilings and walls can become a breeding ground of bacteria, moulds and fungi. AerisGuard™ Surface Treatment (Anti-mould Coat) actively protects all surfaces from biological contamination. U. S. EPA Approved for 12 months protection.

Benefits of using AerisGuard™ Anti-Mould Coat

  • Safe, Non-toxic, Non-hazardous
  • Hypoallergenic, Non-corrosive
  • Non-irritating smell
  • U. S. EPA Approved (Reg. No. 82523-3)

AURO Anti-mould Paint™

AURO Anti-mould Paint™ is a solvent-free, breathable interior wall paint which based on natural minerals (100% natural ingredients guaranteed). Thanks to its high pH value (approx. 12), walls painted with AURO Anti-mould Paint™ are largely resistant to fungal and mould (mildew).

SmellGREEN® Natural Disinfectant Spray

SmellGREEN® Natural Disinfectant is a plant-based disinfectant & cleaner made from plant extracts and essential oils.

  • Kills 99.99% of bacteria & viruses
  • Plant-based ingredients
  • Non-toxic, Non-corrosive on surfaces (pH neutral)
  • Safe for kids, pets and the environment
  • Does not stain surfaces or skin
  • Satisfies stringent food security requirements
  • 100% biodegradable
  • HK Standards and Testing Centre certified, 99.99% anti-bacterial efficacy
Book Now